| Title |
Publisher ▲ |
Price |
Dragonlock Dungeon 1x2 tile with Centered wall
Includes
1x2 Thick Wall
1x2 Thin Wall
1x2 Thin Wall - half height
Additional Releases:
Braziers and Parts to make them unique: Brazier Crafting Kit More Light covers: FDG Brazier Covers LED insert for braziers: LED Light Frame
... [click here for more] |
Fat Dragon Games |
€1,66
|
This product contains one .stl fils for a 60 degree 2x4 dungeon wall tile. File can be mirrored in slicing software for more options.
This product was created under license, Dragonbite Community Creator, Dragonlock, and Drgaonbite are trademarks of Fat Dragon Games in the U.S.A. and other countries.
This work contains material that is copyright Fat Dragon Games and /or other authors. Such material... [click here for more] |
Fat Dragon Games |
€0,83
|
Once I started working on a selection of 2x1" walls for the Enhanced 2x1" Dungeon Walls set, I realized there were only a limited selection of 2x1" models available. This set of 3D printable STL models provides eleven all new 2x1" tiles (each on a four-slot base) to complement the existing selection.
Models included in this set:
Recommended Print Settings:
Layer Size: 0.15mm,... [click here for more] |
Fat Dragon Games |
€8,30
|
We are excited to expand the burrows set with the Ant Hive! This set includes 55 terrain models and 12 miniatures, all printable without supports! Miniatures include the Ant Queen, breeders, soldiers, and workers. The terrain includes all the typical walls and floors necessary to customize your own chambers but also includes predesigned 4x4 nursery chambers, food chambers, and waste chambers. The set... [click here for more] |
Fat Dragon Games |
€12,45
|
I am happy to provide the first expansion to the Burrows Core Set. This set includes burrow holes for multi-level transitions, root obstacles, and burrow holes and transitions for other popular FDG and Community themes including Cavern, Dungeon, Sewer, Dwarven, Village, and Forest floors! Enjoy!
:lang="en">Burrow Entrances & Transitions Set
For best quality prints, use the FDG terrain profile... [click here for more] |
Fat Dragon Games |
€12,45
|
Another resquest from my friend Lou. Castle Wall with Stairs and Crenellations. This is just thr top piece. it is meant to go with the castle set from Fat Dragon Games.
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened Settings:
Layer Height: 0.2mm or less
Infill: 10%,... [click here for more] |
Fat Dragon Games |
€0,83
|
I am really excited about this set. It includes planks, stairs, and ladders for the cavern deck sets, but most of all the bridges! Rope bridges of varying lengths, and perhaps the most exciting, diagonal bridges. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Bridges & Accessories
Recommended print settings are to use the FDG terrain profile at .12 layer height or better,... [click here for more] |
Fat Dragon Games |
€8,30
|
Are your bandits, villains, and miners tired of sleeping on the wet cavern floors and moisture ruining their supplies? Not anymore! I am very excited to offer Cavern Decks. This set includes everything you need to establish a single level deck. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Decks Core Set
Recommended print settings are to use the FDG terrain profile at .12... [click here for more] |
Fat Dragon Games |
€12,45
|
Expand the Cavern Decks set with these edge pieces! This set is perfect for making deck overhangs and transitions. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Deck Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
€6,64
|
Here are a few LED options to go with the cavern deck system. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Decks LED Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
€4,15
|
Here are some basic cavern edges. They are short enough for overlapping cavern levels. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
€1,65
|
This product contains a number of .stl files for tiles with walls centered on 1 inch wide tiles. The set also contains 1 inch by one inch corner and intersection tiles. These one inch tiles do not contain the Dragonlock clip.
This product was created under license, Dragonbite Community Creator, Dragonlock, and Drgaonbite are trademarks of Fat Dragon Games in the U.S.A. and other countries.
This... [click here for more] |
Fat Dragon Games |
€2,49
|
This set adds on to the Cliffside set with a road from ground level up to the cliff top.
See the cover image for a sample of the road and cliff as assembled.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.1mm for finer detail
Infill: 10% for all models recommended, 5% minimum
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size... [click here for more] |
Fat Dragon Games |
€6,64
|
This set includes a total of 24 models to add support beams to your Dragonlock buildings. Use them on overhangs or straight façades. These support beams are compatible with the legacy Village Buildings sets. Have fun building ! The supports are available in two lenght and clip on to 2 inches and 4 inches tiles. There is also an option to add a supported balcony (choose one from the DRAGONLOCK Ultimate... [click here for more] |
Fat Dragon Games |
€4,15
|
* Please log into IMGUR to see the images below *
SET 08 - CR2032 Battery Chest
This printable 10-battery holder includes one chest base model with slots, and a lid.
Lid is set up supported and non-supported, four options:
Hollow (no supports, great for resin printers, angled prints or adding your own)
Supported, breakaway supports
Slots
Slots with a lockline to help bed adhesion.
Additional... [click here for more] |
Fat Dragon Games |
€2,49
|
This product contains one .stl files for a crenelated castle square corner adaptor for use with the Fat Dragon Games Castle Starter Set.
This product was created under license, Dragonbite Community Creator, Dragonlock, and Drgaonbite are trademarks of Fat Dragon Games in the U.S.A. and other countries.
This work contains material that is copyright Fat Dragon Games and /or other authors. Such material... [click here for more] |
Fat Dragon Games |
€0,83
|
Dragonshire Buildings - Door Variations
**NOW WITH** Narrow and extra-narrow door variations from FDG 0301 Dragonshire Doors and Windows!
This set includes STLs:
FOR ENTRYWAYS AND LARGER PASSAGEWAYS:
12x 2.5 in External Double Doors (Bldg 1, Bldg 2, +custom wood-framed doors doors – Left-facing and Right-facing, and reverse doors that swing outwards)
6x 2.5 in Internal Double Doors (Bldg 1,... [click here for more] |
Fat Dragon Games |
€4,98
|
Slotted-Hinge Doors and 2/3rd Height Separate Walls
This set includes STL files for:
Slotted-Hinge Doors:
Steel Door
Prison Door
Broken Wood Door
Remixed from FDG0183U – DRAGONLOCK Ultimate – Dungeon Expansion Set 9. These doors have been redesigned to be interchangeable with the standard separately hinged dungeon doorways found in various Fat Dragon Game DRAGONLOCK sets. To use them, you... [click here for more] |
Fat Dragon Games |
€2,48
|
Use these stencils for quick and easy airbrush painting ! These stencils are compatible with walls from the legacy "Village Buildings 1" set, "Village Buildings 2" set and "Timber & Stone Walls" set. Have fun !
Stencils included : - Gable L - Gable R - Wall A - Wall B - Wall C / Wall C 1 Window - Wall D / Wall D 1 Window / Wall D 2 Windows - Wall D with door Each stencil is available... [click here for more] |
Fat Dragon Games |
€1,65
|
Use these stencils for quick and easy airbrush painting ! These stencils are compatible with walls from the legacy "Timber & Stone Walls" set. Have fun ! Stencils included : - Gable L - Gable R - Wall A - Wall B - Wall C / Wall C 1 Window - Wall D / Wall D 1 Window / Wall D 2 Windows - Wall D with door Each stencil is available with 2 orientations : vertical with 2 sides cover, or horizontal... [click here for more] |
Fat Dragon Games |
€0,83
|
Use these stencils for quick and easy airbrush painting ! These stencils are compatible with walls from the legacy "Village Buildings 1" set. Have fun ! Stencils included : - Gable L - Gable R - Wall A - Wall B - Wall C / Wall C 1 Window - Wall D / Wall D 1 Window / Wall D 2 Windows - Wall D with door Each stencil is available with 2 orientations : vertical with 2 sides cover, or horizontal... [click here for more] |
Fat Dragon Games |
€0,83
|
Use these stencils for quick and easy airbrush painting ! These stencils are compatible with walls from the legacy "Village Buildings 2" set. Have fun ! Stencils included : - Wall C 1 Window - Wall D 1 Window / Wall D 2 Windows - Wall D with door Each stencil is available with 2 orientations : vertical with 2 sides cover, or horizontal with 1 side cover (use mirror function for the other side)... [click here for more] |
Fat Dragon Games |
€0,42
|
If you use the magnetic adaptor bases and want the nice clean look the dungeon edge gives to a regular tile than these double wide dungeon edges are what you need. Print them out - paint them up and attach to the tile and both the tile and adaptor base are covered for a clean look along the outside of the dungeon tiles. I hope you enjoy them and they are free like the originals
... [click here for more] |
Fat Dragon Games |
FREE
|
Torches, lit and unlit, in their sconces in five separate Fat Dragon Games dungeon wall formats: 2x2 angled wall, 2x2 curved wall and floor, 2x2 wall and floor, 2x2 separate wall, and 1x2 wall and floor. I incorporated enough of the original FDG file names in order to easily identify them. No supports necessary!
The torches used were released by STL Miniatures on Thingiverse under the Creative Commons... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
26 Dwarven Style tile remixes. Includes raised mine tracks, mini furnace, channel tiles, dwarven to cavern transition tunnel and ore bins.
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened Settings:
Layer Height: 0.2mm or less
Infill: 10%, 5% minimum... [click here for more] |
Fat Dragon Games |
€3,31
|
Fat Dragon's Realm of the Mountain King wall tile mixed with the Dwarven Brazier. I have also made a space to put the LED light frame found here,
https://www.drivethrurpg.com/product/309914/LED-Light-Frame--357-Cell
Fat Dragon's Realm of the Mountain King can be found here,
https://www.drivethrurpg.com/product/240135/DRAGONLOCK-Ultimate-Realm-of-the-Mountain-King ... [click here for more] |
Fat Dragon Games |
€0,83
|
These are like the basic cavern edges, except more dynamic... Bring your multilevel cavern to life with a variety of edge options. Check out the preview below and enjoy!
Set Preview:
:lang="en">Dynamic Cavern Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
€4,15
|
Take your decks to the next level, literally! This set includes everything you need for multi-level cavern decks. Check out the preview below. Enjoy!
Set Preview:
:lang="en">Elevated Cavern Deck Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
€12,45
|
The elevated wet cavern deck set adds a fantastic multi-level deck experience to any cave. Check out the preview below and enjoy!
Set Preview:
:lang="en">Elevated Wet Cavern Decks Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
€8,30
|
This set of 3D-printable STL models was born when I tried to model a multi-level fortress with stairs near the inside walls and some 5" wide rooms on the lower level. FDG Dungeon Expansion 11 has 2x1" models that would work, except they only have clip slots on the long side and I needed clip slots on the short edges too.
Thus, this set contains versions of the 2"x1" floor and walls from FDG Dungeon... [click here for more] |
Fat Dragon Games |
€4,98
|
Have you ever wanted to create a map out of flesh and disturbing appendages? Well, now you can!
Hell Dimension - Starter set contains 10 models that will allow you to create a lot of weird environments.
... [click here for more] |
Fat Dragon Games |
FREE
|
Curved wall with castle floor. Done at Julie Hanson's request. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This product contains 1/2 height sewer tiles and 2/3 height sewer tiles to be used in conjunction with the Fat Dragon Games Village Sewer set. The set also contains transition pieces to provide a gradual transtion from full height to 1/2 or 2/3 height tiles. In order to make a transition from the opposite side you can mirror the file in your slicer.
This set contains the following pieces:... [click here for more] |
Fat Dragon Games |
€2,49
|
13 tiles remixes for the Tower of Terror and Castle sets. My friend Lou Anders asked me to make these for the tower and castle he was making, so I did.
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened Settings:
Layer Height: 0.2mm or less
Infill: 10%,... [click here for more] |
Fat Dragon Games |
€3,31
|
This is the 2nd set of requested tiles my friend Lou asked me to try and make for him for to go with to Tower of Terror set. Included a small and large balcony, small bump out, potty and support walls that can go under the balconies and bump out.
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened... [click here for more] |
Fat Dragon Games |
€3,31
|
If you like to use the magnetic adaptors but do not like putting multiple 2x2's together on a large floor such as a 2x4 or 4x4 then these magnetic bases will make adding an adaptor easier for you. I favor using the magnetic bases and so I made these to make the look a bit nicer, to save some material for sustainability and to make the application easier. I hope you enjoy, and like the originals... [click here for more] |
Fat Dragon Games |
FREE
|
New additions to the Micro Dungeon family! Approximatley one inch square terrain to build those huge OSR twisty turny caverns! Uses a modified Dragonlock clip to make your creations stay together and easily be moved. Elevation steps are included, so you can make multi layered play areas. I use the Fat Dragon Games flight stands for elevation support. Lay out your floor plan right on your print bed,... [click here for more] |
Fat Dragon Games |
€4,11
|
This product contains a number of .stl files for the Dragonlock Castle and Tower of terror. these include:
- a crenelated castle corner adaptor for a round tower.
- corner adaptor with arrow loop
- castle corner with windows
- castle corner with arrow loops
- tower floor adaptor with trap door
- castle corner with arrow loop and archway
Files are not perfect but will continue to be tweaked... [click here for more] |
Fat Dragon Games |
€4,15
|
This is a revised, retextured, and updated waterfall from the original legacy Wet Caverns Set. I did this waterfall specifically for the Cragmaw Hideout section of the Lost Mines of Phandelver. This model was one of my first big projects when I got into tile remixing. I made this using the original caverns walls, the water from Dungeon Expansion 5, and a whole lot of very careful stretching in meshmixer.... [click here for more] |
Fat Dragon Games |
€0,83
|
Rural Roads
A collection of 3D tiles depicting rural roads suitable for your modern, post-apocalyptic, and sci-fi for RPG and tabletop games. Tiles are designed to be printed on FDM printers with 0.4mm nozzle using the Fat Dragon Games dungeon terrain Ender 3 profile. Road sections come with variants to accommodate traffic signs and stop lights.
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a selection of narrow passages compatible with FDG Starships 1 and 2. ... [click here for more] |
Fat Dragon Games |
€4,11
|
This product contains .stl files for tiles with clips on the sides of walls. It also contains modified pegs for stacking walls.
This product was created under license, Dragonbite Community Creator, Dragonlock, and Drgaonbite are trademarks of Fat Dragon Games in the U.S.A. and other countries.
This work contains material that is copyright Fat Dragon Games and /or other authors. Such material is used... [click here for more] |
Fat Dragon Games |
€1,66
|
SET 07 - Sliding Grate Expansion
REQUIRES: Must own FDG0176 Dungeon Expansion Set 7 (updated in Feb 2021) to include "Sliding Gate" folder.
This "Grate" Expansion set includes
Five floor panels including
Archway
Portcullis Wall*
Solid Wall
Torch Wall
Window Wall
Three new Portcullis doors (fits other FDG Portcullis doors, too!)
* Doors are cross-compatible with FDG0166, the Portcullis in that set... [click here for more] |
Fat Dragon Games |
€4,15
|
This set includes 26 models to add terracotta floors in your Dragonlock buildings. These floors are compatible with the new Dragonshire Buildings sets and the legacy Village Buildings sets. Have fun building !
Models included : - Floor 0.5x1" - Floor 0.5x1.5" - Floor 0.5x2" - Floor 0.5x2.5" - Floor 0.5x3" - Floor 1x1" - Floor 2x0.5" - Floor 2x1" - Floor 2x2" - Floor 3x1" - Floor 3x2" - Floor... [click here for more] |
Fat Dragon Games |
€4,15
|
I am excited to add this Tower of Terror Treasure Set to the treasure set collection. This set includes 16 variations to each of the floor types (Wood, Castle, and Dungeon), plus a treasure version of the trap door floor, stairway floor, four ruined floor pieces, and three scatter treasure piles. ***NOTE: This set requires the FDG Tower of Terror set to full function, as this treasure set is a community... [click here for more] |
Fat Dragon Games |
€8,30
|
o your Dungeons need a little bling?
Have the powers that be in your campaign decided to show off their wealth and power by upgrading their homes, castles, or crypts?
If you want some tiles to add to the visual appeal of your tabletop set up, then consider these Inlay Tiles ans Smooth Walls. They give the opulent appearance of materials such as Marble or Onyx stone.
These tiles were printed... [click here for more] |
Fat Dragon Games |
€8,31
|
I am happy to offer this cavern deck expansion. This set includes all the tiles necessary to run decks along the waterline and over the water. This set can easily double as a dock set. Check out the preview below and enjoy!
Set Preview:
:lang="en">Wet Cavern Decks
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers!... [click here for more] |
Fat Dragon Games |
€8,30
|
This set of 3D-printable STL models continues the Wet Dungeons line of watery pools and streams for dungeon layouts. Once again, it includes models for two styles of wet dungeons, one with a brick edge and one with a rougher natural edge. These models include water flowing through various doors, archways, and wall cracks, connecting pools in adjacent rooms. They can be mixed with other Wet Dungeons... [click here for more] |
Fat Dragon Games |
€10,79
|
When Storm Knights travel through the Living Land, they must overcome the hazards presented by the land itself. The Perils of the Living Land Cosm card allows players to introduce these perils into the game, if the GM can come up with something that fits the adventure. This short supplement offers twelve ready-made perils, with a range of difficulties and styles, ready to drop in whenever necessary.... [click here for more] |
Ulisses Spiele |
€1,25
|
13 mal 7 Dämonenmale – 91 ergänzende beispielhafte Dämonemale von Jannek L. Dämonenpaktierer gehören neben sehr bösen Schwarzmagiern, Namenlosgeweihten, Orks und Tatzelwürmern zu den häufigsten Gegnern aventurischer Heldengruppen und es soll auch Fälle gegeben haben, in denen Helden einem Pakt mit einem Dämon anheimfiel.
Menschen... [click here for more] |
Ulisses Spiele |
Pay What You Want
|
Log In 
